9
Sync with NTP server
Network Time Protocol (NTP) is an alternate way to synchronize your camera’s
clock with a NTP server. Please specify the server you wish to synchronize in
the enter field. Then select an update interval from the drop -down menu. For
further information about NTP, please refer to the web site:
www.ntp.org
.
2.2.2
Security
The Security setting can be found under this path:
System> Security
.
Click on the Security category, there will be a drop -down menu with tabs
including <User>, <HTTPS>, <IP Filter>, and <IEEE 802.1X>.
2.2.2.1
User
The User setting can be found under this path:
System> Security> User
.
Admin Password
Change the administrator’s password by inputting the new password in “Admin
password
” and “Confirm password” text boxes. The input characters/numbers
will be displayed as dots for security purposes. After clicking on <Save>, the
web browser will ask the Administrator for the new password for accessing. The
maximum length of the password is 14 characters.
NOTE:
The following characters are valid: A-Z, a-z, 0-
9, !#$%&’-.@^_~.
Add user
Type the new user's name and password and click on <Add> to add the new
user. User name can be up to 16 characters, and the maximum length of the
password is 14 characters. The new user will be displayed in the user name list.
There is a maximum of twenty user accounts. Each user can be assigned the
privileges of
“Camera control”
,
“Talk”
and
“Listen”
.
I/O access
This item supports fundamental functions that enable users to view
video when accessing to the camera.
