29
System Management
The
System
Management
menu gives you a wealth of settings that you can use to configure
your ALL69000’s system administration functions. You can set up system time, system
notifications, and even upgrade firmware from this menu.
Time: Setting system time
From the
time
menu, choose the
Time
item and the
Time
screen appears. Set the desired
Date
,
Time
, and
Time Zone
. You can also elect to synchronize the system time on the
ALL69000 with an
NTP (Network Time Protocol) Server
.
See the following table for a detailed description of each item:
Time
Item
Description
Date
Sets the system date.
Time
Sets the system time.
Time Zone
Sets the system time zone.
Act as NTP Server
Select
Enable
to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Sync with external NTP
Server
Select
YES
to allow the ALL69000 to synchronize with an NTP server of
your choice. Press
Apply
to change.
Notification configuration
From the menu, choose the
Notification
item, and the
Notification Configuration
screen
appears. This screen lets you have the ALL69000 notify you in case of any system malfunction.
Press
Apply
to confirm all settings. See following table for a detailed description of each item.
WARNING
If an NTP server is selected, please make sure your ALL69000’s network has
been setup to access the NTP server.
