ALL8089WPoE 8 Port Web Smart Switch – User’s Manual
ALLNET GmbH –
www.allnet.de
Security: TCP_UDP Filter Configuration
You can enable or disable this function of per port.
If the “Function Enable” is “Enable”, please kindly check the following setting:
1. “Port Filtering Rule” –
“Deny”: the outgoing packets to the selected port with selected
protocol will be dropped and other protocols will be
forwarded.
“Allow”: the selected protocol will be forwarded and other
protocol will be dropped.
2. “Secure Port” – choose secure ports which you want.
**Note 1:
a. The secure WAN port should be set at the physical port which is connected to
the server.
b. Once this function is enabled, the switch will check the destination TCP/UTP
port number at the outgoing direction of the secure WAN port.
If the condition matches, this packet will be dropped or forwarded.
**Note 2: The description of Secure WAN port is shown on the
bottom of this screen.
3. “Protocol” – choose protocols which you want.
4. Click “Update” to confirm and finish the setting.
Now, the setting of “TCP/UDP Filter Configuration” is finished.
