ALL8089WPoE 8 Port Web Smart Switch – User’s Manual
ALLNET GmbH –
www.allnet.de
Spanning Tree: STP Bridge Settings
This setting is to avoid the loop network.
1. Select the “STP Mode”- choose “Disable”, “STP” or “RSTP”
2. Set the “Bridge Priority” – Set the priority of the Bridge
3. Set the period of “Hello Time” packet – Provides the time period between root
bridge configuration messages.
4. Set the “Max Age” – Indicates when the current configuration message should be
deleted.
5. Set the “Forward Delay” time – Provides the length of time that bridges should
wait before transitioning to a new state after a topology change. (If a bridge
transitions too soon, not all network links might be ready to change their state, and
loops can result.)
6. Click “Update” to confirm and finish the setting.
Now, the setting of “STP Bridge Settings” is finished.
