15
This is a normal loop layout. Remember when connecting to an All-O-
Matic circuit board you use the
your
safety loop detector and
from the exit loop.
You must twist your wires from your exit point of the saw cut all the way
to the circuit board, no exceptions.
normally closed contacts
normally open contacts
from
SWINGER LOOP LAYOUT
Outside Safety loop
Inside Safety loop
Center Phantom loop
5 FT
5 FT
5 FT
5 FT
5 FT
5 FT
Gate in open
position
Gate in open
position
Exit loop
1/4 IN
1/4 IN
1 1/2 IN
TWISTED 6
TURNS
PER FOOT
WIRED IN SERIES
WHEN USED
