AMS Quick Install Guide
31
based on DSCP and class of service (802.1p/ CoS)
Classification
Port based; 802.1p VLAN priority based; IPv4/IPv6 precedence/ type of
service (ToS) / DSCP based; Differentiated Services (DiffServ);
classification and re-marking ACLs, trusted QoS
Rate Limiting
Ingress policer; egress shaping and rate control; per VLAN, per port and
flow based
IPv6 applications
Web/SSL, Telnet/SSH, Ping, Simple Network Time Protocol (SNTP), Trivial
File Transfer Protocol (TFTP), SNMP, RADIUS, Syslog
Management
Web GUI interface
HTTP/ HTTPS
Dual Image
Dual image provides independent primary and secondary OS files for
backup while upgrading.
SNMP
SNMP v1, 2c and 3
RMON
RMON (Remote Monitoring) groups 1,2,3,9
IPv4 and IPv6
Dual protocol stack supported
Firmware Upgrade
Web browser upgrade (HTTP/ HTTPS) and TFTP Upgrade through console
port also supported.
Port mirroring
Up to 8 source ports can be mirrored to single destination port
s-Flow
Monitoring for high speed switched networks supported
UPnP
Universal Plug and Play supported
Green Ethernet
Link detection
Compliant with IEEE802.3az Energy Efficient Ethernet. Automatically
turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or client idle. Active mode is resumed without loss of any packets when
the switch detects link up.
Cable length detection
Adjusts the signal strength based on the cable length. Reduces the
power consumption for shorter cables.
Discovery
LLDP
IEEE802.1AB - Link Layer Detection Protocol with LLDP-MED extensions
Carrier Ethernet Protocols and Features (AMS-4T24S4SFP Only)