AMS Quick Install Guide
6
SAFETY PRECAUTIONS
Read the following information carefully before operating the device. Please follow the following
precaution items to protect the device from risks and damage caused by fire and electric power:
Use the power adapter that is included with the device package.
Pay attention to the power load of the outlet or prolonged lines. An overburdened power
outlet or damaged cords and plugs may cause electric shock or fire. Check the power cords
regularly, if you find any damage, replace it at once.
Proper space for heat dissipation is necessary to avoid any damage caused by device
overheating. The ventilation holes on the device are designed for heat dissipation to ensure
that the device works normally. Do not cover these ventilation holes.
Do not put this device close to a place where a heat source exits or high temperature occurs.
Avoid placing the device in direct sunshine.
Do not put this device close to a place which is damp or wet. Do not spill any fluid on this
device.
Please follow the instructions in the user manual/quick install guide carefully to connect the
device to your PC or other electronic product. Any invalid connection may cause a power or
fire risk.
Do not place this device on an unstable surface or support.
CAUTION:
Circuit devices are sensitive to static electricity, which
can damage their delicate electronics. Dry weather conditions or
walking across a carpeted floor may cause you to acquire a static
electrical charge.
To protect your device, always:
Touch the metal chassis of your computer to ground the static
electrical charge before you pick up the circuit device.
Pick up the device by holding it on the left and right edges only.
If you are connecting a device mounted outdoors to this switch
please ensure you have installed an additional lightning arrestor
between this device and the outdoor equipment.
