FCR200xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2008
1.
Introduction
The FCR200xx series of Fast Ethernet media converters is IEEE802.3u compliant and supports
100Base-TX 100Mb Copper to 100Base-FX 100Mb Fibre. The FCR200xx can be used as a
standalone unit or as a slide-in module for the DCR12xx 19" converter rack (up to 12 units)
for use at a central wiring closet.
2. Model Description
Model
Power Description
TP
↔
ST/SC AC-DC +5V
By AC-DC Adapter
TP
↔
ST/SC USB +5V
By Self Powering Cable(USB)
The 100Mbps Fibre Transceiver
Wavelength
ST/SC/LC multi-mode 2Km
1310nm
SC/LC.S05/S20/S40/S60Km single-mode
1310nm
SC/LC.S80/S100Km single-mode
1550nm
∗
: MT-RJ, VF-45, etc. is available upon request.
Single Fibre Model
TX, RX Wavelength
1310nm Single-Mode 20Km
∗
40/60/80/100Km models are avail.
TX (Transmit) 1310nm
RX (Receive) 1550nm
1550nm Single-Mode 20Km
∗
40/60/80/100Km models are avail.
TX (Transmit) 1550nm
RX (Receive) 1310nm
Note: The single fibre models must be used in pairs one 1310 and one 1550nm.
3. Checklist
Before you start installing your equipment, verify that the package contains the following:
•
The FCR200xx Fast Ethernet Media Converter
•
DC Power Supply
•
This Users Manual CD-ROM
Please notify your supplier immediately if any of the aforementioned items are missing or
damaged.
