MMC1000xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2011
To set or change the default IP address of the media converter via the console port, please follow
the steps below:
1. Log into the media converter via hyper terminal using the above settings.
Fig.
2.1
2. Type
IP
and press
Enter
to enter the IP configuration mode.
3. Type
set ip “IP Address” “Subnet Mask” “Gateway”
where “IP Address” is the IP
address of the switch, “Subnet Mask” is the subnet mask of the switch and “Gateway” is the
gateway address of the switch, then press
Enter
.
4. Type
show
to display the new IP settings for the switch.
5. Enter
exit
to move to the home area of the management. Now enter
save start
to save the
configuration settings to the converter.
6. Type
logout
to exit the switch’s management.
