MMC1000xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2011
3.2.3 Time
The Time section of the management is used to configure time server parameters. The converters
clock can be updated and set manually or it can be set automatically using the NTP Time server
service.
Fig. 3.4
Current Time:
Displays the current system time of the media converter.
Manual:
Used to manually configure the time set in the converter. The Year, Month, Day,
Hour, Minute and Seconds can all be set.
NTP:
Tick this radio button if you wish to use NTP to set the time in the converter.
You can select one of the built in time servers or you can manually enter a
preferred time server. The time zone also will need to be set to the appropriate
value.
Daylight Savings:
Enter the amount of time difference to be implemented when Daylight Savings
starts/ends.
Daylight Savings
Start:
Enter the start date of daylight savings.
Daylight Savings
End:
Enter the end date of daylight savings.
Apply Button:
The Apply button must be pressed after making any changes to any of the
values on this screen.
