MMC1000xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2011
3.3.2 Configuration
Used to configure particular settings on both the copper and the fibre ports, settings include Speed
and Duplex settings, flow control and settings and the port can be physically enabled or disabled.
Fig 3.7
Port:
Is the physical port number of the switch.
Media:
The type of media the port uses, TP (Copper) or Fibre.
State:
Used to enable or disable the port.
Mode:
Used to set the mode of the port, options are Auto (Auto-Negotiation speed and
duplex settings will be automatically set depending on the connecting device),
10M Half, 10M Full, 100M Half, 100M Full and 1G Full. Fibre options are
slightly different only 1G Full can be set.
Flow Control:
Used to enable/disable flow control for the port. Symmetrical, Asymmetrical or
Sym/Asym can be enabled.
Apply Button:
The Apply button must be pressed after making any changes to any of the
values on this screen.