MMC1000xx User Manual
Alloy Computer Products Pty Ltd Copyright ©2011
1. Introduction
1.1 Overview
The MMC1000 Managed Converter is designed for conversion between 10/100/1000Base-T and
1000Base-SX/LX Gigabit Ethernet. With a SNMP agent, web-based management and Telnet text-
based manual driven management, the network administrator can logon to the converter to monitor,
configure and control the activity of each port. In addition, the converter implements bandwidth
rating management capabilities via its intelligent software. The overall network management is
enhanced, and the network efficiency is also improved to accommodate and deliver high bandwidth
applications.
1.2 Key Features
•
Configure and Monitor both the copper and fibre port
•
Supports wire speed packet forwarding
•
RMON Counter support for port traffic monitoring
•
Bandwidth Rate Control for Ingress and Egress traffic in 1Mbps increments
•
1x 10/100/1000Base-T Ethernet UTP Port and 1x 1000Base-SX/LX Fibre Port
•
Different Fibre Connectors supported, SC and LC
•
802.3x Flow Control for Full-Duplex and Backpressure Flow Control for Half-Duplex
•
Firmware Upgradeable
•
Loopback Testing supported
•
Jumbo frame support up to 9600Bytes
•
802.3ah OAM function
•
Supports L2PD (LACP, STP, .. PDU) Forwarding
•
IEEE 802.1q Tagged VLAN
•
Q-in-Q Double TAG VLAN (Supports Tag/Untag)
•
Supports Dying Gasp function
•
Supports Web UI/CLI/SNMP Management
•
Supports IP/IP-less modes
•
Broadcast Storm filtering
1.3 Checklist
Before you start installing your switch, verify that the package contains the following:
•
MMC1000xx Gigabit Ethernet Managed Media Converter
•
AC – DC Power Adapter
•
RS-232 Console Cable
•
This Users Manual CD-ROM
Please notify your supplier immediately if any of the aforementioned items are missing or damaged.
