MS888G2 User Manual
143
Alloy Computer Products Pty Ltd Copyright ©2006
enable egress-rate
Syntax
:
enable egress-rate <range> <data_rate>
Description
:
Used to set up the Egress-rate of each port on the switch.
Argument
:
<range>:syntax 1, 5-7, available from 1 – 24
<data_rate>: 0-1000Mbps.
Possible value:
<range>: 1 to 24
<data_rate>: 0-1000Mbps.
Example:
MS888G2(bandwidth)# enable egress-rate 1-24 20.
: Enables an Egress rate of 20Mbps on all 24 ports.
disable ingress-rate
Syntax
:
disable ingress-rate <range>
Description
:
Used to disable the Ingress-rate of the port.
Argument
:
<range>:syntax 1,5-7, available from 1 – 24
Possible value:
<range>: 1 to 24
Example:
MS888G2(bandwidth)# disable ingress-rate 1-24
: Disables the Ingress rate control for all ports from 1 through to 24.
