Caution
Electronic Circuit devices are sensitive to static electricity. Dry weather
conditions or walking across a carpeted floor may cause you to acquire a
static electrical charge.
To protect your switch, always:
Touch the metal chassis of your computer to ground the static electrical
charge before you handle the switch.
Pick up the switch by holding it on the left and right edges only.
Electronic Emission Notices
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a
Class A computing device pursuant to Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection against such
interference when operated in a commercial environment.
European Community (CE) Electromagnetic Compatibility Directive
This equipment has been tested and found to comply with the protection
requirements of European Emission Standard EN55022/EN60555-2 and the
Generic European Immunity Standard EN50082-1.
EM
C:
Aus
tralian C-Tick Compliance
This equipment is compliant with the required Australian C-Tick standard.
EN55022(1988)/CISPR-
22(1985)
class A
EN60555-2(1995)
class A
EN60555-3
IEC1000-4-2(1995)
4K V CD, 8KV, AD
IEC1000-4-3(1995)
3V/m
IEC1000-4-4(1995)
1KV
– (power line), 0.5KV – (signal
line)
