3. Checklist
Before you start installing the POE converter, please verify that the package
contains the following items.
- The POE2000 Series
- AC Power Cord
- CD containing this manual
Please notify your sales representative if any of the above items are missing
or damaged.
4. Installing the Converter
4.1 POE2000 converter with a Powered Device (PD)
1. Connect the POE2000 converter to an AC power source.
2. Connect the copper cable to your IEEE 802.3af compliant PD device.
e.g. Wireless Access Point, IP Phone, IP Camera
Note:
The POE2000 can also work as a standard media converter and
connect to a non POE device.
3. Connect the fibre cable to your connecting device.
TP Port
10/100Base-TX
Auto-Negotiation
Auto-MDIX
flow control for Full-Duplex
backpressure for Half-Duplex
1000Base-TX
Auto-Negotiation mode
(( Auto-MDIX only for Auto-Negotiation
flow control for Full-Duplex only
Fibre Port
1000Base-SX/LX (SC/LC)
with NWay flow control
Link partner must be 1000FDX with NWay flow
control
