If none of the above resolves your issue, or you require spare parts for your
filter, please contact the supplier of your unit.
SPECIFICATIONS
My Pond Water is Cloudy/Brown
1.
Make sure the unit is turned on 24 hours a day. Continuous running is
needed to maintain a clean and healthy pond.
2.
Remove pond waste and leaves and carry out a partial water change. If
sludge is present treat your pond with All Pond Solutions Anti Sludge
treatment.
3.
Reduce feeding. Overfeeding introduces a lot of organic waste and is one of
the main causes for cloudy water problems.
4.
Make sure to perform regular water changes, check your unit is clean and
adequate for your pond size and do not overstock it.
CUV-207
7W
2000
1200 L/H
2.5m
THROUGH FLOW
STERILISATION AT:
FOR PONDS UP TO (L):
UV POWER (WATTAGE):
CABLE LENGTH:
VOLTAGE:
180
FOR AQUARIUMS UP TO (L):
MODEL:
220-240v
POWER:
INLET & OUTLET ADAPTER
13 & 19mm
CUV-209
9W
4000
1500 L/H
5m
250
220-240v
19, 25, 32 & 38mm
CUV-211
11W
7000
1700 L/H
5m
220-240v
19, 25, 32 & 38mm
CUV-218
18W
12000
2500 L/H
5m
340
220-240v
19, 25, 32 & 38mm
Blanketweed attaches itself to the walls, plant and
rocks within your pond and is sometimes known to
float on the water’s surface, this can prevent to
blanketweed from being pulled through the filter
and UV resulting in the algae not being treated.
In order to treat blanketweed use All Pond
Solutions Blanketweed treatment. This will bind to
the blanketweed and break it down. It will then
allow the filter to pull the remaining algae through the UV system eradicating
any spore the blanketweed may release, and finally filter it out.
My Pond Water is Cloudy/Brown
Will my CUV unit remove blanketweed?
270
11W
12W
15W
22W