TROUBLESHOOTING
No Or Even Low Water Flow
Check the SKIM-2 is plugged in and has power.
The surface strainer must be positioned so it can float
up and down on the surface level and intake water.
Clean the filter floss as this may be blocked.
Visually check the impeller area from the top. The filter
floss should stop any large debris entering this area,
but in case it has, remove it.
3
2
1
Motor Shows No Power
2
1
Check the SKIM-2 is plugged in and has power.
Visually check the impeller area from the top. The filter
floss should stop any large debris entering this area,
but in case it has, remove it.
Excessive Noise
1
Visually check the impeller area from the top. The filter
floss should stop any large debris entering this area,
but in case it has, remove it.
Turn down the venturi air intake by turning the venture
adjuster.
4
2
Still have issues?
Contact the retailer you purchased this All Pond Solutions
product from for further assistance.
