All
SportSystems, Inc.
©
2020.
Viewed from above Viewed from below
STEP 3 - Mount SkyRail™ to Ceiling
At this point your FRAME should have the Universal Projector bracket attached and
secured with the SURFACE PLATE using 4 bolts with washers and wing nuts. Your
FRAME should be turned with the SURFACE PLATE and wing nuts facing downwards.
Slide the screw part of the toggle bolt through each of the holes, with the head of the
screw facing down. Screw each of the folding toggles onto the screws so that they fold
DOWNWARDS.
Begin mounting the SkyRail™ to the ceiling by bringing it near your ceiling and pushing
the toggle bolts through the matching holes. Once each toggle bolt is pushed through
the holes in your ceiling, gently pull down on each of them to ensure the toggle has
opened and is supporting weight.
Once you have confirmed the toggle bolts are supporting the weight, begin tightening
them to secure the SkyRail™ to the ceiling.
Page 6 of 8
Rev July, 2020