THE EMBEDDED WEB INTERFACE
Even without the mobile app the Shelly device can be set and
controlled through a browser and WiFi connection of a mo-
bile phone, tablet or PC.
Abbreviations used
• Shelly-ID – the unique name of the device. It consists of 6
or more characters. It may include numbers and letters, for
example
35FA58
.
• SSID – the name of the WiFi network, created by the device,
for example
shellycolor-35FA58
.
•
Access Point (AP) – the mode in which the device cre
-
ates its own WiFi connection point with the respective name
(SSID).
•
Client Mode (CM) – the mode in which the device is con
-
nected to another WiFi network.
Installation/Initial inclusion
Step 1
Install Shelly DUO into the light socket and turn the light on.
⚠
WARNING!
If you don’t see the WiFi please fallow the step
1 from the device inclusion section of the guide.
Step 2
When the light turns on, Shelly has created an own WiFi
network (own AP), with name (SSID) such as
ShellyBulb-
Duo-35FA58
. Connect to it with your phone, tablet or PC.
Step 3
Type 192.168.33.1 into the address field of your browser to
load the web interface of the Shelly device.
Home Page
This is the home page of the embedded web interface. If it
has been set up is correctly, you will see information about
current power consumption, in Watts, Current state (on/off),
current brightness level, current temperature of the light,
power button, connection to Cloud, present time, settings
Internet/Security
• WiFi Mode - Client:
Allows the device to connect to an
available WiFi network. After typing the details in the fields,
press Connect.
• WiFi Client Backup:
Add a backup WiFi network, in case
your primary one becomes unavailable.
• WiFi Mode - Acess Point:
Configure Shelly to create a Wi-
Fi Access point. After typing the details in the fields, press
Create Access Point.
• Cloud
- Enable or Disable connection to the Cloud service.
• Restrict Login
- Restrict the web interface of Shely with a
Username and Password. After typing the details in the fields,
press Restrict Shelly.
• SNTP Server
- You can set a custom SNTP Server. Type the
URL address and press Save.
⚠
ATTENTION!
If you have entered incorrect information
(wrong settings, usernames, passwords etc.), you will not be
able to connect to Shelly and you have to reset the Device.
Timer -
Тo manage the power supply automatically, you may use
• Auto OFF:
After turning on, the power supply will automat-
ically shutdown after a predefined time (in seconds). A value
of 0 will cancel the automatic shutdown.
• Auto ON:
After turning off, the power supply will be auto-
matically turned on after a predefined time (in seconds). A
value of 0 will cancel the automatic power-on.
⚠
WARNING!
If you don’t see the WiFi please fallow the step
1 from the device inclusion section of the guide.
Weekly Schedule -
This function requires an Internet connec-
tion. To use Internet, your Shelly has to be connected to a
local WiFi network with an active internet connection.
Shelly may turn on/off automatically at a predefined time, at
sunrise/ sunset, or at a specified time before or after sunrise/
sunset. Multiple schedules are possible.
Night Mode -
With this mode you can set a period of time
and level of brightness, in which any turning on will set the
brightness to the predefined level. You must select a start &
end time, with the brightness level.
Settings
Power On Default Mode
- This sets the default output state
when Shelly is powered.
• ON:
Configure Shelly to turn ON, when it has power.
• OFF:
Configure Shelly to turn OFF, when it has power.
• Restore Last Mode
- Configure Shelly to return to last state
it was in, when it has power.
Transition Time
- Set the time (in miliseconds), for which
Shelly Duo goes from 0% to 100%. The value can be from 0
to 5000 ms.
Time Zone and Geo-location
- Enable or Disable the automat-
ic detection of Time Zone and Geo-location.
Firmware Update
- Update the firmware of Shelly, when a new
version is released.
Factory Reset
- Return Shelly to its factory default settings.
Device Reboot
- Reboots the device.
Device Information
- Here you can see the:
• Device ID - Unique ID of Shelly
• Device IP - The IP of Shelly in your Wi-Fi network
Additional Features -
Shelly allows control via HTTP from
any other device, home automation controller, mobile app or
server. For more information about the REST control protocol,
please visit
www.shelly.cloud
or send a request to
developers@shelly.cloud
• White mode
– work as a normal white color bulb. As well
you can select the intensity and switched it off
In the White version of the bulb you can control the color tem-
perature and the intensity as shown on figure:
Timer
- Тo manage the power supply automatically, you can use
• Auto OFF: After turning on, the power supply will automat-
ically shutdown after a predefined time (in seconds). A value
of 0 will cancel the automatic shutdown.
•
Auto ON: After turning off, the power supply will be auto
-
matically turned on after a predefined time (in seconds). A
value of 0 will cancel the automatic power-on.
Weekly Schedule -
This function requires an Internet connec-
tion. To use Internet, your Shelly has to be connected to a
local WiFi network with an active internet connection.
Shelly may turn on/off automatically at a predefined time, at
sunrise/sunset, or at a specified time before or after sunrise/
sunset. Multiple schedules are possible.
Night Mode -
With this mode you can set a period of time
and level of brightness, in which any turning on will set the
brightness to the predefined level. You must select a start &
end time, with the brightness level.
Internet/Security
• WiFi Mode - Client: Allows the device to connect to an avail-
able WiFi network. After typing the details in the respective
fields, press Connect.
• WiFi Client Backup: Add a backup WiFi network, in case
your primary one becomes unavailable.
•
WiFi Mode - Acess Point: Configure Shelly to create a Wi-Fi
Access point. After typing the details in the respective fields,
press Create Access Point.
Cloud -
Enable or Disable connection to the Cloud service.
Restrict Login -
Restrict the web interface of Shely with a
User- name and Password. After typing the details in the
fields, press Restrict Shelly.
Settings
Power on default mode
- this sets the default output state
when shelly is powered.
•
On: configure shelly to turn on, when it has power.
•
Off: configure shelly to turn off, when it has power.
•
Restore last mode: configure shelly to return to last state it
was in, when it has power.
Transition time
- set the time (in miliseconds), for which
shelly duo goes from 0% to 100%. The value can be from 0
to 5000 ms.
Firmware update
- update the firmware of shelly, when a new
version is released.
Time zone and geo-location
- enable or disable the automat-
ic detection of time zone and geo-location.
Factory reset -
return shelly to its factory default settings.
Device information - here you can see the device ID(unique
id of Shelly), device ip(the ip of shelly in your wi-fi network).
