1.0 Introduction
This manual provides safety and installation instructions for flexible photovoltaic (PV) modules.
1.1 Disclaimer of Liability
The installation techniques, handling, and use of this product are beyond company control. Therefore, Allto Solar
assumes no responsibility for loss, damage or expense resulting from improper installation, handling, or use.
2.0 Safety Precautions
Before installing this product, read all safety instructions in this document.
• All installations must be performed in compliance with any applicable local codes.
• Do not stand on, drop, scratch, or allow objects to fall on modules as it may damage them and void the warranty.
• DO NOT WALK ON THE PANELS.
• Do not place anything on the modules, because resulting residue may damage or stain the surface.
• DO NOT bend the products, it may break the solar cells.
• DO NOT place the products on a surface constructed from combustible material and keep it away from
explosives and corrosive substances.
• DO NOT place the products near heat sources or apply direct heat to the products
• DO NOT allow water enter to charging controller and the output interface of the panel.
3. Product Overview
4.0 Electrical Characteristics
Electrical characteristics of the solar panel are described below.
