Step-2:
Set Charge Controller
Connect the MPPT charge controller to the XT60 Extension cord. The LED screen will display the PV voltage
immediately when exposing the solar panel to full sun. Press the Mod button to choose battery type among 12V
GEL/SEALED/FOOLDED battery.
Step-3: Connect charge controller to battery
Wire the included clamp to battery terminals, the charge controller will begin to charge the battery automatically
and the real-time battery voltage and charge current will be displayed on the LCD screen of the charge controller,
and the LED indicator blinks to show the percentage of the battery.
6.0 Troubleshoot
CAUTION DO NOT connect multiple solar panel in series. Doing so may cause irreversible damage.
If the output port of the solar panel turns on and off frequently during the charging process, please check
if the solar panel is receiving enough sunlight and if the device is drawing a large amount of power from
the output port. The solar panel cannot deliver more power to the device than the amount of solar power
it has captured.
7.0 Warranty
Thank you for purchasing the solar panel, should you experience any defect due to the manufacturer of this
product, you are entitled to get a replacement or refund. If You have any questions, feel free to sent us email
, we will get back to you within 24h.
ALLTO SOLAR TEAM
