FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO PARA EL CONSUMIDOR
1-800-423-3598
ALLTRADE TOOLS LLC
1431 VIA PLATA, LONG BEACH, CA 90810-1462
www.alltradetools.com
MADE IN / FABRIQUÉ EN / HECHO EN CHINA
© COPYRIGHT 2003, ALLTRADE TOOLS LLC REV. 1
Troubleshooting:
1. The compressor will not run.
Probable cause:
1. No power, or the switch is in the “OFF” position.
2. Motor overheated
3. Tank Pressure at maximum
Solutions:
1. Make sure the compressor is plugged in and the switch
is in the “ON position.
2. Allow compressor to cool for 5-10 minutes until thermal
overload switch resets.
3. Release air from tank
2 .Tank pressure drops when compressor shuts off.
Probable cause:
1.Loose drain valve
2.Loose connection at regulator or pressure switch
Solutions:
1. Tighten drain valve
2. Check connections for leaks
3. Compressor runs continuously.
Probable cause:
1. Excessive water in tank
2. Humidity too high
Solutions:
1. Decrease usage or increase size of compressor
2. Check all connections for leaks
4. Excessive starting and stopping.
Probable cause:
1.Excessive water build-up in tank
Solutions:
1.Drain tank through drain valve.
