7.
Clean filter element with warm soapy water. Rinse the filter and air dry before reinstalling. Replace filter element if it cannot be
cleaned sufficiently.
8.
Reinsert filter element into filter body and reinstall filter faceplate.
9.
Screw the filter body into pump head by turning clockwise until the filter is hand tight.
DO NOT OVERTIGHTEN.
MOISTURE IN COMPRESSED AIR
Moisture is a normal by-product of compressing air. As the moisture builds during compressor use, it can be carried though the air
hose. When using a paint spray gun or sandblasting gun, the use of a special filter to remove moisture from the air line is highly rec-
ommended. Moisture in the compressed air will cause water spots in paint jobs and cause blasting media to clog the sandblasting gun.
13
