10
B. Installation
1
3
2
4
780 mm
Important:
- The mounting wall and fastener selection is at the discretion of the installer. Allume Energy take no responsibility
in the appropriate site selection of the SolShare or the appropriate bracket fastener choice.
- Weight rating fasteners should be rated to at least 30kg of shear force per fastener.
Before mounting the SolShare, please screw in the antenna
(see pre-installation diagram on page 8). Then follow the steps
below to mount the brackets and enclosure:
1. Firmly secure the mounting brackets to the chosen wall for
installation. Allume Energy recommend using the provided
fasteners to attach the brackets into a suitable stone or
masonry wall. If another wall material has been chosen for
installation, please use suitable fasteners with at least
30kg shear force per fastener.
2. Lift the SolShare onto the mounting brackets as directed in
the diagram. Check both top and bottom brackets are secure.
3. Insert the locking bolt through the SolShare top mounting
bracket and secure at both ends.
4. Ensure the SolShare is securely fastened to the wall
and locked into place.
