25
1.will the machine through the USB cable connected to the PC's USB port, this
machine is the screen Notification will have a "USB already connected" notice
options.
2.Click "USB already connected" notice options, and choose the "open USB
storage devices", and then in the personal computer see mobile operators disk
dish, can as U disk the use of the machine disk data operation.
3G network Settings
1. Insert the SIM card into the dedicate slot.
2. Into the machine "Settings" under a "wireless and network", will be closed Wifi
option, Wifi and 3G are not used in the same time.
Note
Make sure that you turn off the tablet before you insert a SIM card. Also, you
must turn off the tablet before you remove any SIM card.
Ethernet network Settings
1. Into the machine "Settings" under a "wireless and network", will be closed wifi
options.
2. Will USB Ethernet card through the special OTG line connected to the machine to
the USB interface, the system will automatically recognize and attached to the
network.
3. Into the machine "Settings" under the "Ethernet Settings" project and check the ""
Ethernet" option can.
4. If you need to specify the etheric network IP and gateway, can enter the "Ethernet
Summary of Contents for AX2 Frenzy
