5
EN
Remove the stand before installing the TV on a wall mount by performing the stand attachment in
reverse.
If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.
Use an authorized wall mount and contact the local retailer or qualified personnel. Otherwise it is not
covered by the warranty.
Do not over tighten the screws as this may cause damage to the TV and void your warranty.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
Notes:
1.The pictures are for reference only.
2.For the TV sets with terminals towards the wall, in order to leave enough space to use the terminals,
a gasket is needed together with each screw to fix the wall mount. It is a small hollow pillar whose
internal diameter is 8mm, external diameter is 18mm and height is ≥30 mm.
Precautions for using Remote Control
Use the remote control by pointing it towards the remote sensor. The items between the remote control
and the remote sensor will interfere with its normal operation.
Do not shake violently the remote control. Also, do not splash liquid on the remote control, and do not
put the remote control in high humidity places.
Do not place remote control under direct sunlight. It will cause deformation of the unit by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If
so please change the lighting or the TV's position, or operate the remote control closer to the remote
sensor.
Precautions for using battery
Improper use of the battery will cause leakage. So please follow the methods below and use carefully.
Please note the batteries' polarity, to avoid short circuit.
When the battery's voltage is insufficient and affects the use range, you should replace it with a new
battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
Do not put the battery into fire and charge or decompose the battery.
Please dispose batteries abiding by relevant environmental protection regulation.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
BASIC SETTINGS
1.
Connecting the remote with the TV
(optional, valid only for TV models with Bluetooth remote control)
.
For the models that require this step, before searching through Bluetooth, make sure you have
activated the external Bluetooth devices in pairing mode.
In the case of the remote, simultaneously press the “LEFT” and “MENU” buttons to enter into pairing
mode (the remote LED must flash when entering in pairing mode).
Select the name of the remote - TV BLE Remote - and press OK to pair.
For other Bluetooth devices, read their instruction manuals for the pairing.
2. Select menu language.
3. Select if you want or do not want to use an Android device to set up the TV.
Note: If you want to use an Android device to set up the TV, please proceed as indicated on the screen.
If you do not want to use an Android device to set up the TV, continue with the following settings.
4. Select if you want or do not want to connect the TV to a WiFi network.
If you choose to connect the TV to the network, you must select the desired network – insert password
– press OK and the TV is connected to the network.
Select if you want or not to connect to your Google account.
