9
APPENDIX
9.1
I. Factory Reset
When powering, hold the mode key and wait for all octave LEDs to light. This will clear all saved
sequences back to factory state.
9.2
II. Firmware Update and Sequence Backup
With the unit unpowered, connect a USB cable from the port at the left side of the PCB (near
the Mode button) to a computer. The ASQ-1 will appear as a standard removable storage de-
vice. Copy a valid firmware file to the root directory to update. When complete, ASQ-1 will
automatically eject once the update completed and is ready to use powered normally (any
’unmount’ errors from the computer can be safely ignored).
9.3
III. Sequence Backup
To back up saved sequences, connect the ASQ-1 to a computer(the same as performing a
firmware update). Copy the ’ASQ1SEQ.BAK’ file from the ASQ-1 root directory to the desired
back up location on your drive. A previous backup may be copied back to the ASQ-1 to replace
the existing sequences stored in the memory.
12
