BIBI 850-BL Use and maintenance manual Rev.00
28
2.6
Inspections before use
Make sure movements are done on flat, sturdy ground. This can be done using the inclinometer
installed in the basket (see photo below).
Make sure that there are no hollows or ridges in the floor and that there is enough room for the
machine to pass through.
Make sure that there are no bystanders or obstructions in the surrounding area before moving off.
Visually check under and around the machine to make sure that there are no oil or gasoline leaks.
If leaks are discovered, comply with the MAINTENANCE instructions.
Check the fuel level before starting to work (see par. 6-5.-Refueling), thus preventing interruptions
during work.
Check the motor oil and hydraulic oil level (see par. 6.2.13-Checking and changing oil).
Do not run the engine in closed areas like garages or the like. The engine exhaust gas contains
carbon monoxide, a poisonous gas that can quickly saturate a closed space and cause difficulties or
even death.
Visually check to make sure that all screws, bolts, plug ring nuts are tight and that the welds are
undamaged (see chap.6—Maintenance)
Always check to make sure that track tension is correct
Basket inclinometer
Summary of Contents for BiBi 850-BL
