BIBI 850-BL Use and maintenance manual Rev.00
56
4.1.5 Combustion engine starting
To start the combustion engine and the hydraulic pumps, use the key on the ground controls
(
17
). Before starting, perform the inspections described in sect.
2.6- Inspections before use.
The key-switch functions are:
(CENTRAL): Machine off-electrical system not powered
(RIGHT): The platform's entire electrical system starts, including the
mobile pushbutton
panel
in the basket. The
ground controls
are excluded.
(LEFT): The platform's entire electrical system starts. The
ground controls
are enabled and
the
basket pushbutton panel is automatically disabled
.
This is followed by a check-control of the indicator lights of the safety system, which flash as
described below:
- Indicator light (2): Maximum inclination reached
- Indicator light (5): Basket overloaded
If one or more of the indicators fails to flash, it means that the relative light bulb must be
changed.
Once the check-control cycle has terminated, the engine can be started by pressing the related
lever (
5
).
Before climbing in the basket:
1.
Remove the key from the ground control panel and take it with you:
2.
Make sure that the fuel supply lever is in the ON position (see figure to the side)
3.
FUEL VALVE LEVER
ON
Summary of Contents for BiBi 850-BL
