PAGE
42
ALMAC s.r.l.
No. Identification
Function and
Status
Description of the function
1
Button (START)
ENGINE IGNITION AND AUTOMATIC LEVELLING
Ignition of
machine and
console
1. Press the button to access the
radio control (after releasing the
emergency mushroom);
2. Press the button again to activate
reception (Radio console with
machine); in this way the platform
electrical system is activated;
3. Press the button to activate the
console controls;
4. When the machine is on it also
acts as an acoustic signalling device.
2
Selector
ELECTRIC MOTOR SELECTION
ELECTRICAL
ENGINE position
Powering of electric motor AC 110V
or 220V.
To switch on the electric motor,
press the button (1) located on the
left side of the console.
The electric motor only works if the
plug on the back of the machine has
been connected to an external
power source.
BATTERY ENGINE
position
Powering of electric motor DC 48V.
To switch on the electric motor,
press the button (1) located on the
left side of the console.
3
Emergency
Button
EMERGENCY STOP
4
Selector
MACHINE DYNAMICS POSITION SWITCH
HIGH position
The loading platform remains
always positioned at the maximum
height permitted. This allows the
passing through openings with a
minimum width of 1.47 meters.
MED position
The loading platform remains
always
positioned
at
an
intermediate height.
LOW position
The loading platform is always
positioned at the minimum height
permitted. This allows the passing
through openings with a minimum
Summary of Contents for MULTI-LOADER 2.5
