Marcin Lipka
Zaprojektowany przez
Sprawdzony przez
Zatwierdzony przez
Data
Materia
ł
Skala
1:6
A3
Nazwa cz
ęś
ci
Format
Masa
Data
Data
04.01.2022
Nie
dotyczy
m
in
. 3
00
m
m
!
!
Marcin Lipka
Zaprojektowany przez
Sprawdzony przez
Zatwierdzony przez
Data
Materia
ł
Skala
1:8
A4
Nazwa cz
ęś
ci
Monta
ż
_nozek_SIDE
Format
Masa
Data
Data
28.07.2021
Nie
dotyczy
Marcin Lipka
Zaprojektowany przez
Sprawdzony przez
Zatwierdzony przez
Data
Materia
ł
Skala
1:5
A4
Nazwa cz
ęś
ci
Montaz_nozek_SIDE_2
Format
Masa
Data
Data
28.07.2021
Nie
dotyczy
43
ALNOR
®
ventilation systems
is a legally protected trademark and technical patent. All rights reserved.
w
w
w
.al
nor
.com.
pl
User Manual
HRU-MinistAIR
Fig. 13 - Installation of the trap in
a horizontal position
In order to install the trap in a given position, carefully
place the flexible hose on the unplugged condensate
connector pipe. Construct the trap with a flexible hose
and clip (Fig. 13). When the trap is ready and connected
to the waste water system, fill it with water.
NOTE:
The plugs supplied are designed for concrete
walls, solid bricks or cellular concrete.
Suitable rawlplugs, screws, which can be
purchased in a hardware store, should be
used for other materials.
NOTE:
Remember to fill the trap. If the trap is dry,
condensate is not drained from the housing
and water can leak through the housing or
damage the fan. Fill the trap by pouring water
directly into it.
Do not fill the trap while the unit is running!
If there is no space for the condensate drain trap,
a condensate pump should be purchased from HVAC
wholesellers.
Fig. 12 - Horizontal installation of the unit on the floor.
To install the unit horizontally on the floor, attach the feet at the positions shown in the figure below.
