Maintenance Instructions
Before Use
Check the power cord for signs of damage such as fraying. Replace the cord before use if
there is any damage.
Check the
fi
lter for signs of dirt or obstructions. Clean or replace the
fi
lter as necessary
Check the coils for signs of buildup. Clean if needed.
Cleaning the Machine Body
Use a soft, damp cloth to clean the exterior of the unit. Do not use any soap or solvents.
Filter Maintenance
1. Unplug the unit.
2. Slide out the
fi
lter.
3. Check the
fi
lter for dirt
and buildup.
4.
For a Pre- Filter or MERV-8:
Clean the
fi
lter mesh by
vacuuming it or washing with warm
water (no soap or cleaners).Gently shake the
fi
lter dry,
then reinsert it.
5.
For a Carbon, or HEPA Filter:
If there is dirt or buildup, replace
fi
lter.
Removing the Housing
1. Remove the screws on the housing.
2. Extraction screen.
Coil Maintenance
Once per year, clean the coils with an approved coil cleaner.
Coil cleaner should be a self-rinsing, foaming cleaner such as WEB® Coil
Cleaner.
Pump Maintenance
Pump Access:
Remove the screws on the housing, then lift o
ff
. Unplug the pump drain line, then remove the
screws holding the pump in place.
Cleaning the Pump Reservoir:
Once the screws are removed, lift o
ff
the top of the pump and set aside. Use a paper towel to
wipe out the base of the pump.
3. Open the shell.
