AR7088H Router User Manual
Tel:+86 592-6195619 Fax:+86 592-6195620
E-mail:
Page 44 of 59
Web:
Add: NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Start:
Enter the number of the first port of the range you want to seen by users on the
Internet and forwarded to your PC.
End:
Enter the number of the last port of the range you want to seen by users on the
Internet and forwarded to your PC.
Protocol:
Chose the right protocol TCP,UDP or Both. Set this to what the application
requires.
IP Address:
Enter the IP Address of the PC running the application.
Enable:
Click the Enable check box to enable port forwarding for the application.
3.8.3 Port Triggering
Port Triggering allows you to do port forwarding without setting a fixed PC. By setting Port
Triggering rules, you can allow inbound traffic to arrive at a specific LAN host, using ports
different than those used for the outbound traffic. This is called port triggering since the
outbound traffic triggers to which ports inbound traffic is directed.
Application:
Enter the name of the application in the field provided.
Triggered Port Range:
Enter the number of the first and the last port of the range, which
should be triggered. If a PC sends outbound traffic from those ports, incoming traffic on
the Forwarded Range will be forwarded to that PC.
Forwarded Port Range:
Enter the number of the first and the last port of the range, which
should be forwarded from the Internet to the PC, which has triggered the Triggered
Range.
Enable :
Click the Enable check box to enable port triggering for the application.
3.8.4 DMZ
The DMZ (DeMilitarized Zone) hosting feature allows one local user to be exposed to the
Internet for use of a special-purpose service such as Internet gaming or
videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The
Port Forwarding feature is more secure because it only opens the ports you want to have
opened, while DMZ hosting opens all the ports of one computer, exposing the computer
so the Internet can see it.
Any PC whose port is being forwarded must should have a new static IP address
assigned to it because its IP address may change when using the DHCP function.
