background image

C A U T I O N

C A U T I O N

Read all these instructions carefully before using this product.

• Make sure that the voltage rating on the type plate corresponds to your main voltage. If not, see your 

retailer and do not connect the appliance.

• Keep out of children or incompetent persons and do not allow them to operate this appliance.
• Only use the appliance for domestic purposes and in the way indicated in these instructions.
• From time to time, check the cord for damages. Never use the appliance if cord or appliance show

any sign of damage.

• Make sure that the connection cord does not touch any hot surface.
• Keep combustible materials such as drapes, clothing, towels away from the appliance.
• Do not cover the appliance.
• Keep the appliance at least 1 meter away from walls and any other thing, to permit a good air 

circulation.

• Never immerse the product in water or any liquid for any reasons. Do not use it at less than 60 cm of

a shower, a bath-tub or a swimming-pool.

• Do not use if you have wet hands.
• Never use the appliance on or near hot surfaces.
• Never move or range the appliance by pulling the cord.
• To avoid any risk of burn, never move the appliance when it is hot.
• Before tidying the appliance, make sure that it is unplugged from the power and that it is completely

cooled.

• Unplug the appliance before cleaning.
• Do not clean the appliance with abrasive chemicals.
• Do introduce neither metallic objects, nor fingers inside the appliance in order to protect you from

electrical shock.

• Never use accessories that are not recommended or supplied by the manufacturer. It could 

constitute a danger to the user and risk to damage the appliance.

• All interventions made by a non-qualified person can be dangerous; in this case guarantee conditions

would cancel. As all electrical products, a competent electrician must repair it.

THE MANUFACTURER WILL NOT ASSUME ANY RESPONSIBILITY IN CASE OF NON ADHERENCE TO 

THIS RECOMMENDATION

SAVE THESE INSTRUCTIONS CAREFULLY

7

E N G L I S H

E N G L I S H

ALPATEC 

thanks you for buying this product and hope you will be totally 

satisfy with it. For your comfort and security all the steps of the manufacturing

have been checked and the product succeeded in all our quality tests.

ALPATEC

’s  products : their design and facility of use make you like them.

  notice_CT3000  22/11/06  17:39  Page 7

Summary of Contents for CT 3000













Reviews: