Rev 1.5
Page 5
On the contrary, others, before giving you access, ask you to fill out a little form. It's nothing
to worry about, and won't present any problems if your intentions are honest.
And if, upon the opening of an FTP page, you encounter the abbreviation
pub,
it has nothing
to do
with publicity
,
it just signifies free and public access. .
For the ALPEG, the connection is made by directly typing your IP address with your login as:
anonymous, and no password.
How to access it?
-Either through your navigator. (All of them do not offer this possibility)
-Or by using specialised software, for example, in the case of particular or heavy FTP use.
As an individual, you are always the client, and you are going to have to use the protocol
dedicated to this service: ftp (the way you use http to browse the web, or @ pour email),
which, to connect to the ALPEG server, amounts to:
ftp://10.16.99.107 ............connection from a navigator.
ftp.10.16.99.107 .............if using specialised software.
In fact, on the Web you are downloading files practically all the time, but with a fundamental
difference with respect to FTP: the documents on the Web are only displayed
temporarily,
for the time that you are viewing them.
3.2 Controls and access methods.
3.2.2 Network connection
The network connection is the way to access the player interface using a traditional Web
navigator for HTML pages, and by any FTP software for file transfer.
See the network interface section.
For direct connection between a PC and the player, you MUST use an inverter cable, for any
other type of link (e.g. via a hub), you can use a normal non-inverter RJ45-RJ45 cable.
If you are not sure which IP address to configure, contact your network administrator for the
IP address to configure the player so that it can be incorporated into your current system.
For a connection to the original IP address of the Player, you can use the following address on
your computer: 10.16.99.110 with subnet mask: 255.255.0.0
