Installation & Systems Manual RUBIDIUM SERIES
Page 12
Observe the following general precautions irrespective of the number or kind of modules
plugged to the frame:
DO NOT OPERATE WITHOUT COVERS
To avoid electrical shock or fire hazard, do not operate this product with covers
or panels removed.
DO NOT OPERATE IN WET/DAMP CONDITIONS
To reduce the risk of fire or electrical shock, do not expose this apparatus to
rain or moisture.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.
Product Damage Precautions
PREVENT OVERHEATING
To prevent product overheating, position the unit only where sufficient air
circulation can be maintained. Good air circulation is essential to prevent
internal heat build-up, do not block any ventilation openings. Do not expose
the unit to direct sun light or any other strong lights. Keep the unit away from
heat sources. Install the unit in accordance with the manufacturer’s
instructions.
PROVIDE PROPER ENVIRONMENT
Dust, humidity, shocks and strong electromagnetic fields must be avoided. Do
not expose this apparatus to dripping or splashing water. Ensure that no
objects filled with liquid are placed on the apparatus.
UNPLUG DURING LIGHTNING STORMS
Unplug this apparatus during lightning storms or when unused for long
periods of time. Alternative: Use a UPS or power surge suppressor.
OBSERVE EMC REGULATIONS
The EMC regulations are observed only under the following condition: Use
high quality shielded cables at data inputs and outputs.
