Installation & Systems Manual RUBIDIUM SERIES
Page 52
3.17
XT
/
XV
Standard Options
You will find detailed information in the operating manuals mentioned below.
All manuals are available Option Description
-B
: Video bypass relay
for
XT
or
XV
The bypass relay appears in the video input to output path, not in
the video loop path. The main functionality is to maintain the video
path even in an event of power failure.
→
Operating manual:
“XT / XV Modules“.
-S
: Sony 9P and VDCP
converter
for
XT
This option handles a time code from a serial interface in order to
visibly insert it in a video window or to convert it to LTC/VITC time
code. Different modes of operation are available. The serial
interface accepts the "Sony Protocol for Video Recorders" (Sony 9p)
or the ”Video Disk Control Protocol” (VDCP).
→
Operating manual:
“AT / DT / HT / XT Modules Option S“.
-O
: Time code offset
features
for
XT
This option combines XT and a control unit TCU to a system which
handles time code offset applications in an easy way. The TCU
control unit is used to enter time offsets, to select the operating
mode, and to display the re-generated time.
→
Operating manual:
“AT / DT / HT / XT Modules Option O“.
-P
: Biphase
to
time
code converter
for
XT
This option has been developed for “film and time code”
applications.
XT accepts biphase signals at its GPI inputs. These pulses will be
converted to a time (HH:MM:SS:FF), to a film frame counter and to
a footage counter. These data can be output in a time code format
and can visibly be displayed on a video window.
→
Operating manual:
“AT / DT / HT / XT Modules Option P“.
-I
: IRIG-B reader
for
XV
The XV module will be equipped with an IRIG-B reader. IRIG-B
data can visibly be displayed on a video window.
→
Operating manual:
“AV / DV / XV Modules Option I“.
-L
: LTC reader
for
XV
The XV module will be equipped with an LTC reader. LTC data can
visibly be displayed on a video window.
→
Operating manual:
“AV / DV / XV Modules Option L“.
