ADM-VPX3-9V2 User Manual
1 Introduction
The ADM-VPX3-9V2 is a 3U VPX embedded high-performance reconfigurable computing card intended for high
speed switch applications. Featuring 28G transceivers in the Xilinx Virtex Ult Plus FPGA at all VPX P1
and P2 wafers, and two FireFly sites for rugged optical communications.
Figure 1 : ADM-VPX3-9V2 Product Photo
1.1 Key Features
Key Features
•
PCIe Gen3 x1, x4, x8, or x16 capable
•
Convection and conduction thermal management configuration
•
3U, 4HP VPX form factor
•
Four banks of DDR4 SDRAM 72 bit wide memory (ECC), 16GB (4GB per bank) rated at 2666MT/s.
•
All 32 wafers of P1 and P2 are capable of 28 Gpbs operation (total 896 Gbps)
•
2 FireFly sites each capable of 4x28Gbps operation (total 224 Gbps)
•
Option for MPO optical breakout through front panel
•
Supports VU9P, VU13P Virtex Ult FPGAs in the B2104 package
•
Debug board fits in 5HP slot profile for easy access to debug switches, LEDs, JTAG, and system monitor
•
FPGA configurable over JTAG and SPI configuration flash
•
Voltage, current, and temperature monitoring
Page 1
Introduction
ad-ug-1377_v1_2.pdf
