______________________________________________________________________
Alpha ESS Co., Ltd.
Page 26 of 29
Your Smart Energy
Routine Maintenance
After the equipment are out of operation, the following notes should be paid attention to
while maintaining:
Related safety standards and specifications should be followed in operation and
maintenance.
Disconnect all the electrical connections so that the equipment would not be powered
on.
Wait at least 5 minutes after disconnection in case that the residual voltage of
capacitors down to safe voltage. Use a multi-meter to ensure the equipment is completely
uncharged.
The equipment should be repaired by professional staff and it is strictly for-bidden for
maintenance staff to open equipment on their own.
Appropriate protective measures should be taken while maintaining, such as insulated
gloves, shoes, and anti-noise ear plugs.
Life is priceless. Make sure no one would get hurt first.
The batteries need to be charged to 30%~50%SOC rate when the whole sys-tem is
static (that is, the batteries have not been charged for two weeks or longer) for a long time,
in case of over discharge.
Please contact us in time if there are any conditions that could not be explained in the
manual.
