___________________________________________________________________
Alpha ESS Co., Ltd.
Page 44
Your Smart Energy
Installation
2.3.5.2 ADL3000
There are 4 buttons on the front of the electricity
meter:
1. Enter button / Energy button
2. Down arrow / Power button
3. Up arrow / Voltage & current button
4. SET button
Step 1: The initial interface of the meter
(normal working mode) is shown above.
Step 2: Click the “SET” button to enter the
password interface
Step 3: Click the "Enter" button to enter the
above interface, and press the up and down
arrow keys to enter the password 0001.
Step 4: Click the "Enter" button and the
password input is completed.
Step 5: Click the “Enter” button again to
enter the address interface
Step 6: Click the “Enter” button and press the
up and down arrow keys to set the meter
address. The Grid meter (DC, AC and Hybrid
system) address is set to 001, the PV meter
(AC and Hybrid system) address is set to 002.
