___________________________________________________________________
Alpha ESS Co., Ltd.
Page 45
Your Smart Energy
Installation
Step 7: Click the "Enter" button and the
address setting is completed.
Step 8: Click the “SET” button to enter the
following interface
Step 9: Click the “SET” button again to enter
the save interface
Step 10: Click the “Enter” button to enter the
following interface, press the up and down arrow
keys, and set “no” to “YES” to save the
configuration.
Step 11: Click the "Enter" button and the setting
ends.
2.3.5.3 ACR10R
There are 5 buttons on the meter's front:
1. Enter key
2. Arrow to the right
3. Up arrow
4. SET button
5. FN key (no function)
