Modes
use when
General (displays
as “Gen”)
any time of day without regard to time since
last meal
AC
no food intake for at least 8 hours
pC
2 hours after a meal
QC
testing with the control solution
6. Setting the reminder Alarm
You may set up any or all of the re-
minder alarms (1-4). The meter displays
“On” or “OFF” and
, press M button to
turn on or turn off to set the first reminder
alarm.
Press M button to select “On”, then press SET button to set the hour.
When the hour is flashing, press M button to add an hour. Press SET
button to confirm and go to minutes, press M button to add one min
-
ute. Hold M button longer to add faster. Press SET button to confirm and
go to the next alarm setting.
If you do not want to set an alarm, press SET button to skip this step.
If you want to turn off an alarm, find the alarm number by pressing
SET button in the setting mode, press M button to change from “ON’ to
“OFF”.
At the time of your alarm, the meter will beep and automatically turn
on. You can press M button to silence the alarm and insert a test strip
to begin testing.
If you do not press M button, the meter will beep for 2 minutes then
switch off. If you do not want to test at this time, press M button to
switch off the meter.
congratulations! you have completed all settings!
note:
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will switch
off automatically.
the fOur MeASurinG MODeS
The meter provides you with four modes for measuring General, AC,
pC and QC.
You can switch between each mode by:
1. Start with the meter switched off. Insert a test
strip to turn on the meter. The screen will display a
flashing blood drop and “Gen”.
52
53
