Page G-2
AM-436-20(-00) 40MB and AM-436-21(-11) 80MB SCSI Drives
For AM-1400LC and AM-1600M installations, the product kit (PDB-00436-20/21)
includes special drive mounting brackets that must be used in order to mount this drive.
These brackets (DWF-20533-00) are drilled to match the mounting holes on the Maxtor
drive. The brackets are held in place with two phillips head screws inserted through the
chassis bottom.
SCSI disk drives used in AMOS 680X0 based computers must be installed with the
drive’s signal ground isolated from the computer’s chassis ground. Before installing
your new disk drive, see Section 10 (in this document) dealing with drive isolation in
AMOS based products.
PDI-00436-20, Rev. A15