3. Set up
3.1 Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is any damage. The packaging is recy- clable;
save it for reuse or dispose of it properly.
3.2 Unpacking
1.
Take the UPS out of the PE foam.
2.
Remove the packing materials.
3.
A standard unit includes:
One (1) user manual.
One (1) AC input power cord (not supplied with hard wired models).
Two (2) IEC output cables (for UPS models with IEC sockets only).
One (1) RJ11 phone jack cable.
The accessories shown below for tower and rack mounting:
Page
5
to
32
