protected must be at least 30 cm on the side and 30 cm on the back of the furnace. Flammable items
need to be at a distance of at least 80 cm from the opening of the furnace.
You should leave sufficient space between the furnace and the flammable objects (wood paneling,
furniture, curtains, etc.).
Installation of objects above the furnace is not allowed if you use the furnace top surface.
When installing the drain pipes for used air, you should leave a gap of at least 40 cm away from the
flammable materials.
Before connecting the furnace to the chimney, you should consult a competent local chimney sweeping
institution. Connecting the chimney to the furnace is done through the connecting elements in
SRPS.M.R4.031 (DIN 1298 or DIN EN 1856-2). Make sure that the connecting parts for the chimney do
not enter the waste gases drain intersection, and that they are properly sealed
.
5. Air Regulation
Air regulation is done on the front side of the furnace under the cover.
Air regulators on the front side of the furnace enable the ignition and fuel combustion.
Make sure that the ash tray is not filled up. You should empty it regularly as to enable the unobstructed
airflow.
Due to the poor supply of oxygen, there are large emissions of harmful substances, which can lead to
blocking the chimney.
5.1 Primary Air
Reliable fuel combustion is determined based on the primary
combustion air.
This air is adjusted by regulating the primary air to the front side of
the furnace under the cover. Air regulation is done on the front side
of the furnace under the cover.
Fig. 2
Figure 2, position 7 shows the opening and the closing
direction of the regulator. To fire the wood, the regulator
needs to be opened as much as possible.
NOTE: To avoid overheating of the furnace, the quantity of fuel must not exceed 2.0 kg of dry log wood or
brown coal briquettes per hour, when the combustion air is properly adjusted.
5.2 Using the Handle on the Firebox Door
As the handle on the firebox door
becomes extremely hot while the furnace is
in operation, opening and closing of the firebox door
is possible only by using a special key from the
attached furnace accessories (see Fig. 3).
Fig. 3
7
