background image

2

 INTROduCTION

Thank you for purchasing an Alpha

®

 Pneumatic Reversible Cut-Off Tool. A wide 

range of accessories help you perform many different tasks. For your safety, please 

read this manual thoroughly before you start operating this polisher. 

 abOuT The SymbOlS

According to the hazard level, all safety notes in this manual are 

classified into “DANGER”,  “WARNING”, and “CAUTION”.

  DANGER!  Death or serious personal injury is imminent when 

handling this tool incorrectly.

  WARNING! There is a possibility of death or serious personal 

injury when handling this tool incorrectly. 

  CAUTION!  There is a possibility of personal injury or property 

damage when handling this tool incorrectly.

Note:    In some situations, failing to observe WARNING notes could result in death 

or serious personal injury.  Be sure to read and observe the safety notes 

to ensure safety and correct use of the tool.  

 SafeTy INSTRuCTIONS fOR POWeR TOOlS

 

1.  K

NOW YOUR  POWER TOOL.    Read  owner’s  manual  carefully.  

Learn its applications and limitations as well as specific potential 

hazards particular to this tool. 

2. 

KEEP WORK AREA CLEAN. Cluttered areas and benches invite 

accidents. 

3. 

AVOID DANGEROUS ENVIRONMENTS.  Keep work areas as dry 

as possible. Do not use tool in presence of flammable liquids or 

gases.  Keep the area well lit. 

4. 

KEEP CHILDREN AND VISITORS AWAY.  All visitors should be kept 

a safe distance from the work area. Keep out of reach of children.  

Summary of Contents for COTR-03

















Reviews: