745-363-C0-001 Rev. B
7
2. Installation
1
Start
Finish
2
4
3
8. Ensure complete adhesion of screen to enclosure by following
“spreading” sequence illustrated below: top, left, bottom, right.
2.2
Weatherstripping Installation Procedure
Currently weatherstripping tape comes preassembled in kits for
enclosures and doors. However, you may have weatherstripping in a
roll. The following installation procedure applies in either case.
1. Remove front door of enclosure.
2. If you have a weatherstripping kit, match each strip to an
appropriate enclosure door edge. If in a roll, cut strips to
appropriate lengths. Ensure strip ends will meet at corners.
3. Remove protective paper from adhesive strips.
4. Press weatherstripping into place. Confirm ends meet at corners
and butt against any existing weather trip at sides. Some trimming
may be necessary.
