47
Figure 45 — Channel information for position 6
The icon in the
Startup/ Shutdown
row indicates whether the LPS channel is powered ON (green) or OFF (black)
Clicking a green icon for a particular channel commands the module to turn the output of that channel OFF.
Clicking a row displays a pop-up window with information specific to that LPS module and its channels.
Note 1: If the LPS modules are swapped quickly after acquired by CXCI+ controller,
the logical position in the GUI is not automatically updated to match the new slot posi-
tion. To prevent this from happening, leave the LPS36 modules disconnected for long
enough for the CXCI+ to detect they are missing (wait for the LPS Comms Lost alarm to
be raised) before swapping them. In the event that the module position is not updated
for any reason, an inventory update on the GUI or a soft reset on the CXCI+ will solve
the issue.
Note 2: The remote Startup/Shutdown feature using CXCI+ controller is not a direct
replacement for main power switch. This feature is mainly used to facilitate the reset of
any latched channel, to temporarily enable/disable the channel, to synchronize restart
of all group channels, or to clear any fault on the module. When the channel/module
is in shutdown mode, cycling the input supply (by unplugging the module or by power
removal) will make the channel/converter active again when power is restored.
NOTE:
