0120011-J0 Rev J
50
LPS Alarms
The LPS and channel alarms are indicated on the
Line Powering System > View Live Status
interface with a red
border (Figure 20).
Figure 48 — LPS alarm highlighting
Figure 49 — Viewing LPS alarms
LPS alarms report in
Alarms > View Live Status
(Figure 49),
Alarms > Configure Alarms
(Figure 50 on page
51), and
Event Log
interfaces.
The CXC “rolls up” LPS alarm events. For example, if there are multiple LPS devices and one of them on one chan-
nel reports
Vout Low
, the alarm “LPS Channel Vout Low” is raised.
If a channel on a different LPS, also reports the same alarm, another distinct alarm will not be raised – it is “rolled up”
into a single event.
