0120011-J0 Rev J
52
To set up a
Custom Alarm
:
1. Select the menu item
Alarms > Configure Alarms
(Figure 52).
2. From the
Alarm Configuration
drop-down menu, select
Custom Alarms�
3. Select the
Enable
check box of an unused custom alarm (
Custom 1
4. From the
Priority
drop down menu, set the alarm
Priority
to
Major
.
5. Click the
Custom 1
hyperlink to access the
Equation Editor
.
6. In the
Equation Editor
, select
Fan Tray
,
Fan Fail
and then click
Accept
.
Figure 52 — Configuring a custom alarm
Figure 53 — Equation Editor for configuring a Fan Fail alarm
7. The
Alarms > Configure Alarms screen
reappears with the activation value now visible.
8. Click the
Submit Changes
button at the top of the screen.
Figure 54 — Fan Fail alarm
